| X (Length)300 mm | Y (Height)27 mm | Z (Depth)2 mm |
|
STL model weight25 MB
Dimensions are shown for your convenience.
You can scale the model to any size. |
||
Delicate repeating scallop braid in low relief - a decorative moulding 3D model composed of overlapping circular petals with a small raised boss at the center of each unit. The profile reads as a classical bead-and-reel-style frieze: smooth rounded faces, crisp inner countersink on each boss and slightly beveled outer edges that catch light when milled. Ideal as a continuous trim for frames, furniture facades, cornices or decorative panels. Delivered as a clean STL file prepared for CNC milling and compatible with ArtCAM and most CAM software; ready for 3D model stl download and quick import into toolpath generation. This stl model for CNC router produces a finely detailed wooden relief with minimal finishing. Instant download available immediately after payment.
-
AAzat Evgenyevich Purchase Review 4.027 September, 2024Beautiful and easy to mill.
-
IIvan Romanovich Purchase Review 5.025 May, 2024Good mesh optimization: no intersections, the file loads fine in CAM. Applied a small allowance and got a clean profile, minimal sanding required.
-
BBoris Purchase Review 5.02 October, 2023I tried cutting it in 3 mm material — the relief holds up, joints between the 'coins' are smooth. Tuned for a 2 mm bit, the result was very neat with no extra work.
-
KKarim Arsenovich Purchase Review 5.027 September, 2023Small coins are all even.
-
VVasily Mironovich Purchase Review 5.03 October, 2022Model quality is above average. I reduced feed rate in tight spots to avoid burrs — after that everything came out great. Will use it again for other projects.
-
KKsenia Albertovna Purchase Review 5.014 June, 2022Very convenient to scale and join for long frames. The repeating pattern fits evenly, saved me a lot of time on batch orders.
